News and Exhibits

 
 
NEW!
Name of the exhibit: Electrical Motors OM
Exhibitor: Power Plastics s.r.o.
Manufacturer: Sun Yeh, Taivan
Code: 8.9.
Description:  
Torque: 35Nm ~ 4,500 Nm
Ingress protection: IP 67, NEMA 4X
Operation temperature: -30°C ~ +65°C
Relative humidity: 30% ~ 95%
Material: aluminium alloy with powder coating
 
 
 

 
NEW!
Name of the exhibit: TRIPLE+ NWL
Exhibitor: Power Plastics s.r.o.
Manufacturer: TRIPLE+, Israel
Code: 8.8.
Description:  
Water Leak Management Systém.
Includes innovative battery operated and wireless flood detectors, repeaters, remote control, and shut-off technologies that enable the automated control of water valves. Thi serves to avert water flooding and damages.
 

 
Name of the exhibit: KOZEGHO POLYMER SYSTEM
Exhibitor: KOZEGHO, Lda.
Manufacturer: KOZEGHO, Lda., Portugal
Code: 3.2.
Description: Polymer preparation systems, dosing systems.   
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Filter with High Multi-layer Filter Cartridge, Series F6000HM
Exhibitor: Aqua Global s.r.o.
Manufacturer: YAMIT E.L.I., Israel
Code: 2.2.
Description:  
High-media pressure filter with high separation efficiency, designed to treat surface water, groundwater, process and waste water. Vessel diameter 400 - 4000mm. Construction material: Steel ST37.2, SST304L, 316L, 316Ti.
 
 
 
 
 
 
 
 
 
 

 
 
NEW!
Name of the exhibit: Automatic Electric Screen Filter, Series AF900
Exhibitor: Aqua Global s.r.o.
Manufacturer: YAMIT E.L.I., Israel
Code: 16.1.
Description:  
Industrial automatic filter with stainless steel screen with a filtration range of 10-3,000μm and a capacity up to 1,800m3/hr. Cleaning the screen with suction nozzles. Continuous and highly economical operation.
 
 

 
 
NEW!
Name of the exhibit: Welding HÜRNER for PE pipe
Exhibitor: GEROtop spol. s r.o. 
Code: 5.12.
Description: 
Electric welding machines, butt welders, polyphase welding. Accessories and tools for proper welding.
 
 
 
 
 
 
 
 
 

 
NEW! 
Name of the exhibit: KRASO system seal inserts for  pipeline and cables
Exhibitor: GEROtop spol. s r.o. 
Manufacturer: Krasemann GmbH & Co. KG, Germany
Code: 15.7.
Description: 
Sealing inserts for sealing passages and cables by all types of building constructions. Options for new buildings as well as for reconstructions, suitable for all the engineering networks, water treatment plants, central heating, etc. Regular and sectional sealing inserts. The Czech Drinking Water Certificate. Stocks, atypical production. Technical support.
 
 
 
 
 

NEW!
Name of the exhibit: VERTILINER - shaft rehabilitation by the lining
Exhibitor:B M H spol. s r.o. 
Manufacturer: Germany
Code: 12.7.
Description: 
Shaft rehabilitation by seamless linig with glass fibre sleeve fortified by UV radiation - possible usage in old circular shafts as well as in square ones or in those with changing cross-sections. Vertiliner increases tightness and surface protection, it also improves firmness. 
 
 
 
 

 
NEW!
Name of the exhibit: SAERTEX-LINER® H2O, Water pipeline rehabilitation
Exhibitor: B M H spol. s r.o.
Manufacturer: Germany 
Code: 12.2.
Description: 
The first UV glass fibre sleeve for trenchless drinking water pipes rehabilitation - hygienically sound - environment friendly - steady under high pressure. Sleeve can be used from DN 200 - 1500 mm, maximum length makes 320 m.
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Telemetric control system for decentralized wastewater treatment
Exhibitor: SATTURN HOLEŠOV spol. s r.o.
Manufacturer: SATTURN HOLEŠOV spol. s r.o., Czech Republic 
Code: 3.14.
Description: 
Technology for system solutions for decentralized wastewater treatment in rural areas. The operation of the WWTPs connected to the system is monitored on-line 24/7. Critical places in the domestic sewage treatment plant are equipped with sensors. The system is equipped with a central dispatcher with sw applications for PCs and mobile phones, which allows the creation of analyzes, reports and other operational agendas.
 
 

 
NEW!
Name of the exhibit: GRP-Liner SAERTEX-LINER® H2O
Exhibitor: Vodovody a kanalizace Jablonné nad Orlicí, a.s.
Manufacturer: SAERTEX MultiCom, GmbH, Germany
Code: 12.4.
Description: 
The world´sfirst and only UV curable GRP-Liner SAERTEX-LINER® H2O with certification for the trenchless rehabilitation of potable water pipes. With the range DN 200-DN 1000 and the maximum possible length making currently 300m. Certification of health and safety in the US, Germany, Brazil, Poland, Russia, Slovakia and the Czech Republic.
 
 
 
 
 

 
Name of the exhibit: EKONOIL UK, UK-S
Exhibitor: Ekona, spol. s r.o.
Manufacturer: Ekona, spol. s r.o., Czech Republic
Code: 17.5.
Description: 
Coalescent full-flow separator of light liquids from rain water. Installation in the ground. Material - polypropylene or polyethylene. CE certificate.
 

 
Name of the exhibit: Oil skimmer ROPAK
Exhibitor: Ekona, spol. s r.o.
Manufacturer: Ekona, spol. s r.o., Czech Republic
Code: 16.1.
Description: 
Oil skimmer collector. Collect all types of oil matters that float on the watersurface (crude oil, light fuel oil, motor oil). Unique solution for contaminated water from metallurgy, power engineering, railway depots. Simple, robust, low-cost, efficient.
 
 
 
 
 
 
 
 

 
Name of the exhibit: Sewage treatment plant serie D50 - D150
Exhibitor: Ekona, spol. s r.o.
Manufacturer: Ekona, spol. s r.o., Czech Republic
Code: 3.12.
Description: 
Sewage treatment plants of SBR technology, serve for purification of sewage water from small to middle sources of comntamination. Finebubble aeration, cyclic operation, pumped outlet of sewage water. Very reliable, effective and simple to operate. Low operating costs. Professional service provided. Technology in a polypropylene tank, can also be built into a concrete waterproof tank.
 

 
 
Name of the exhibit: Domestic sewage treatment plant serie D5 - D35
Exhibitor: Ekona, spol. s r.o.
Manufacturer: Ekona, spol. s r.o., Czech Republic
Code: 3.13.
Description: 
Small sewage treatment plant serve to purify the sewage water from small individual sources of contamination. SBR technology. Very reliable, simple to operate. CE certificate. Professional service provided. Technology in a polypropylene tank, alternatively in a reinforced concrete waterproof tank.
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: DUOFIT
Exhibitor: Hawle Armatury, spol. s.r.o.
Manufacturer: Hawle Armatury, spol. s.r.o., Czech Republic
Code: 3.4.
Description: 
Fitting for repair and drilling pipes under pressure. The fitting body is shaped to cover damaged pipe, pipe socket or fitting. Made from carbon steel with anticorrosion coating. Water release output for easy installation.

 
 
Name of the exhibit: Small water meter box MODULO
Exhibitor: HUTIRA - BRNO, s.r.o.
Manufacturer: Cahors, France
Code: 8.9.
Description: 
Small water-measuring shafts MODULO allow to complete all the tasks (installation, reading, exchange of water meters) without necessity to enter the shaft. 
 
 
 

 
NEW!
Name of the exhibit:  Water treatment unit HUTIRA CCW
Exhibitor: HUTIRA - BRNO, s.r.o.
Manufacturer: HUTIRA - BRNO, s.r.o., Czech Republic
Code: 2.1.
Description: 
Products HUTIRA CCW, Crystal Clear Water are based on a unique patented technology of Mr. Ing. Frantisek Svoboda CSc. They use more than 40 years of research, development and improvement. Technology is based on hydraulic pulse clarifier with a segmented stirrer.
 
 

 
NEW!
Name of the exhibit: Volute Dewatering Press GS-202
Exhibitor: Amcon Europe s.r.o.
Manufacturer: Amcon Europe s.r.o.
Code: 3.4.
Description: 
GS series is the basic, fully equipped lineup of models capable of handling large amounts of sludge.
 

 
NEW!
Name of the exhibit: Azud Helix Automatic DLP LF
Exhibitor: Water Life s.r.o.
Manufacturer: Sistema Azud, S.A., Spain
Code: 2.2.
Description: 
Automatic disc filter with flow up to 6l/s and low backwash water demand - 1,5l/s-1,5 bar only, 30 l per backwash. Filtration grade from 5 µm. Good ad dealing with organics, fibres, paper, metal files. Improved performance/consumptin ratio when air assisted backwash - only 12l.
 
 
 
 
 
 

 
NEW!
Name of the exhibit:  Azud Modular Automatic LF
Exhibitor: Water Life s.r.o.
Manufacturer: Sistema Azud, S.A., Spain
Code: 2.2.
Description:  
Automatic mini disc filter with flow up to 5l/s and very low backwash water demand - 0,9l/s-1 bar only, 15 l/backwash. Filtration grade 130 µm. Good at dealing with organics, fibres, paper, metal fibres.
 
 
 

 
Name of the exhibit: Conical ring coupler FRIALEN KM XL d 1000 mm
Exhibitor: Nicoll Česká republika,  s.r.o.
Manufacturer: FRIATEC AG, Germany
Code: 5.5.
Description: 
The effects of out-of-roundness, tolerances and local flattenings at the pipe become stronger with increasing dimension. Conical ring coupler KM XL compensates the gap between coupler and pipe with two flexible rings and preheating technology. Rings are mechanically tightened into a conical coupler.
 

 
Name of the exhibit: Infiltration system from Eco Bloc Inspect blocks and VARIO 800 flex shaft
Exhibitor: Nicoll Česká republika,  s.r.o.
Manufacturer: Otto Graf GmbH, Germany
Code: 17.1.
Description:
The Vario 800 flex shaft system can be directly installed in an infiltration system with EcoBloc Inspect. Shaft can be fully integrated, therefore no additional excavation is required and has various applications (e.g. as an inlet shaft, detention shaft or inspection shaft).
 
 
 
 
 
 

 
NEW!
Name of the exhibit:  Shaft ring with integrated sealing TBS-Q.1 INTEGRO
Exhibitor: CS-BETON s.r.o.
Manufacturer: CS BETON s.r.o., ČR
Code:  6.6.
Description:
Shaft ring with integrated sealing and 10 m water column waterproof certification.
 
 
 

 
NEW!
Name of the exhibit:  Prefabricated sorption gully TBV-SOL 2/4 CSB
Exhibitor: CS-BETON s.r.o.
Manufacturer: CS BETON s.r.o., Czech Republic
Code:  17.5.
Description:
Prefabricated sorption gully is constructionally solved as light liquid separator with sorption refining. Able to bear weight when is laid. Inflow possibility through inflow grating or side inflow from linear drainage.
 
 

 
NEW!
Name of the exhibit: Energy saving air pump Secoh-JDK
Exhibitor: BIBUS s.r.o.
Manufacturer:  China
Code:  3.19.
Description
Energy Saving air pump for domestic WWTP.
 
 
 
 
 

 
NEW!
Name of the exhibit:  Progressing cavity grinder pump E/One for pressure sewer system
Exhibitor: BIBUS s.r.o.
Manufacturer:  USA
Code:  7.4.
Description 
Progressing cavity grinder pump E/One for pressure sewer system.
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Self-priming trash pump
Exhibitor: BIBUS s.r.o.
Manufacturer: USA
Code:  7.3.
Description
Pumps for sludge, big solids and corrosive materials.
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit:  Control unit for pump station
Exhibitor: BIBUS s.r.o.
Manufacturer: ČR
Code:  8.8.
Description 
Control unit for pump stations.
 
 
 
 
 
 
 
 

 
 
NEW!
Name of the exhibit: PLGWI - stainless steel lifting point
Exhibitor: pewag Czech s.r.o.
Manufacturer:  Pewag s.r.o.
Code: 4.9.
Description 
The PLGWI screw nut is the corrosion-resistant version of the pewag PLGW lifting point and comes with the same benefits regarding dimensions, load capacities and mounting, thus enormously widening the range of possible applications.
 
 
 
 
 
 

 
Name of the exhibit: PCWI Stainless steel pump chains
Exhibitor:pewag Czech s.r.o.
Manufacturer:  Pewag s.r.o.
Code: 4.9.
Description
These high-grade pump chains have a load capacity that ranges from 200 to max. 12,000 kg. Their welded design, solid construction and range of components makes them particularly suitable for submersible pumps and breathers in water and wastewater applications.

 
 
NEW!
Name of the exhibit: HYDROpur & TITONpur
Exhibitor: SVING
Manufacturer:  HYDROTEC Technologies AG
Code6.8.
Description
Kanalizační poklopy D400 s novým typem těsnění proti klapání HYDROpur pevně spojeným s víkem poklopu technologií přesného lití, odolného proti UV záření, povětrnostním podmínkám, solím a mikrobům. Tlumí veškeré vodorovné a kolmé síly.
 
 

 
 
NEW!
Name of the exhibit: OTT System
Exhibitor: OTT System GmbH&Co.KG
Code3.2.
Description
We manifacture aeration systems OTT MAGNUM®AIRREX and OTT D-REX®AIRREX in our own production facility with \"Made in Germany\" quality. We develop and install turn-key aeration systems for high perfomance municipal and industrial biological waste water treatment.
 
 
 

 
 
NEW!
Name of the exhibit: KOMBI MODEL 4
Exhibitor: PATOK a.s.
Manufacturer: PATOK a.s. + SINZ Fahrzeugbau GmbH, CZ + DE
Code: 4.5.
Description: 
Combined sewerage cleaning machine equipped with top level water recycling. The machine, as one of a few on market, is able to simultaneously provide high performance of: water recycling system, high pressure water pump and vacuum pump.
 

 
NEW!
Name of the exhibit: Franklin Electric - High Efficienty System for Submersible pumps
Exhibitor: PUMPA, a.s.
Description: 
Franklin Electric developed a High Efficiency Submersible Borehole Systém, consisting of a synchronous submersible NEMA motor, associated variable frequency drive and autput filter.
 
 
 
 
 

NEW!
Name of the exhibit: Compact electromagnetic flow meter Picomag
Exhibitor: ENDRESS + HAUSER CZECH s.r.o.
Manufacturer: Endress + Hauser, Switzerland
Description: 
Compact electromagnetic flow meter with seamless system integration by means of IO-Link interface and settings through the application (Android, iOS) in smart device using Bluetooth interface. Parameters: DN 15 - 50 (25l/min - 750l/min) Measuring accuracy: 2% o.r. + 0.5% f.s. Repeatability: 0.2 f.s.
 

 
NEW!
Name of the exhibit: QuickView AirHD
Exhibitor: Radeton, s.r.o.
Manufacturer: iPEK International GmbH
Code: 11.1.
Description: 
Quick View AirHD - is a modern wireless sighting camera for inspection of sewers. It offers secure and immediate inspection of sewers and extreme range of up to 125 m per inspection. It also offers precise focus, FULL HD pictures, special lighting - Quad patent Haloptic ᵀᴹ.
 
 
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Enigma 3M
Exhibitor: Radeton, s.r.o.
Manufacturer: Primayer Ltd
Code: 4.1.
Description: 
Enigma 3M is automatic water leak detection system. Patented technology provides submilisecond accuracy of correlation. Data from sensors are available through the web application Primeweb. Enigma 3M is battery powered and has GPS.
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Restraint Couplings and Flange Adaptors - UltraGrip Dn 450-600
Exhibitor: VIKING JOHNSON
Manufacturer: UK - Viking Johnson
Code: 5.11
Description: 
Next Generation UltraGrip products are high performance restrained jointing solution for pipework from DN40 up to DN600 containing an end load resistant mechanism, that grips and seals onto a variety of pipe materials. The DN450, DN500 and DN600 have been recently added to the range and are available in coupling, flange adaptors & reducing coupling formats.
 
 
 
 

 
NEW!
Name of the exhibit: Pocket oxymeter with optical oxygen sensor
Exhibitor:  INSA s.r.o.
Manufacturer:  INSA s.r.o., Czech Republic
Code:  10.11
Description:
Pocket instrument for measurement of oxygen, pH/ORP and temperature MFD 79 OPTO. Correct measurement even under zero speed of the sample. No problems with electrolyte and calibration. Very small size and weight. Price from 13 800 Kč (345 EUR).
 

 
NEW!
Name of the exhibit: Optical process oxygen sensor CSOT 63
Exhibitor:  INSA s.r.o.
Manufacturer:  INSA s.r.o., Czech Republic
Code:  8.5.
Description:
Process optical sensor for measurement oxygen concentration in WWTP, fish tanks, ponds etc. Galvanically separated analogue and data output. Allow simple, direct connection to monitoring and controlling systems. Supply: 15/24V, 20 mA. Cover: IP 68.
 

 
Name of the exhibit: Pipe seal HSD-SSG
Exhibitor: Bettra, s.r.o.
Manufacturer: Hauff-Technik GmbH & Co. KG, Germany
Code: 15.7. 
Description:
HSD - SSG sealing is designed to seal the pipe with an external diameter of 18-25 mm. Tightening of the nuts moves stainless pressures plates, those press the special rubber to the pipe-line as well as into the casing (protector) or into core drill. This process ensures reliable tightening.
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Manhole bottom B & BC EXELENT DN 800
Exhibitor: B & BC a.s.
Manufacturer: B & BC, a.s., Czech Republic
Code: 6.6. 
Description:
The monolithic manhole bottoms B & BC Exelent can be manufactured with watercourse shape and location of openings in the side walls that correspond to the customers´ wishes. The watercourse can be made from concrete, covered by basalt, earthenware or adjusted by plastics. Bottoms are prepared under XA3, XF4 levels of environmental influence.
 

 
NEW!
Name of the exhibit: B & BC Pipe TZP 300/200 IT
Exhibitor: B & BC a.s.
Manufacturer: B & BC, a.s., Czech Republic
Code: 6.4. 
Description:
Newly manufactured pipes DN 1400 - 3000 are straight pipes of cast SCC concrete, class C 40/50, with XA3, XF4 level of environmental influence under EN 206. Those are direct pipes with half-groove in diameters DN 2200-3000. We also produce pipe blanks and transition walls.
 

 
NEW!
Name of the exhibit: B & BC sump bottom 250/250
Exhibitor: B & BC a.s.
Manufacturer: B & BC, a.s., Czech Republic
Code: 6.6. 
Description:
We newly manufacture reinforced concrete sump bottoms DN 2200-3000 from the cast concrete, class 40/50, level of environmental influence XA3, XF4 under Czech Technical Standard EN 206. The sump bottom can be supplemented by the partition wall or - for example - by the preparation for the buoyancy ring. Custom-made tiling, lining or bushings are possible.
 
 
 
 
 

 
NEW!
Name of the exhibit: Clorious2
Exhibitor: Brenntag CR s.r.o.
Manufacturer: Brenntag, Germany
Description:
Transportable, ready-to-use chlorine dioxide solution. No on site chemical mixing, no generator, no handling. High purity, concentrated chlorine dioxide in aqueous solution. Long term stable and replicable. Save to use, easy to apply. Patented chemistry based on oxidationof chlorite.
 
 
 
 
 
 
 

 
Name of the exhibit: Dismantling joints - coated
Exhibitor: BÜSCH Armaturen spol. s r.o.
Manufacturer: BÜSCH Armaturen spol. s r.o.
Code: 5.11. 
Description:
Types BF2, BF3, BF4. Nominal sizes from DN 65 to DN 1200 mm, for pressure rates PN10 and PN16. For installation or diassembling of valves and pumps in pipeworks. For a length adjustment up to ±25 mm. Continous threaded rods in BF2 and BF3. Flange connections on both sides. Flange connection according to DIN 2576 with reduced flange thickness. Drilled according to PN 10/16. Flange connections according to DIN EN 1092-1:200, Typ 01, 02, 11. Inside and outside epoxy-coaling, thickness according to DIN 30677-2, blue, RAL5012. Materials - steel parts: Steel RST 37.2 (S235JR), sealing: EDPM, NBR on request, mouting material: steel galvanised, stainless steel SS304 or SS316Ti on request.
 

 
Name of the exhibit: Penstocks 4-side sealing - SUPERIORLY TIHGT.
Exhibitor: BÜSCH Armaturen spol. s r.o.
Manufacturer: BÜSCH Armaturen spol. s r.o.
Code: 6.7. 
Description:
Whilst leakage on penstocks is usually caused by insufficient frame stability and frame distortions SAFOX® patented sealing system is not affected by such parameters as it is separated from the frame. Due to this separation SAFOX® perfectly seals to the mounting wall and sliding plate and is even able to level structural variations. The freely suspended sealing ring is self-adjusting and does not require adjustment of wedges after mounting. SAFOX® penstocks are non-drip leak proof under seating and unseating pressure and withstand water heads of up to 10m. When required SAFOX® can be designed to withstand higher water heads.
 
 
 
 

 
Name of the exhibit: Leakage monitor
Exhibitor: DHI a.s.
Manufacturer: Czech Republic
Code: 8.6. 
Description:
Leakage Monitor is a comprehensive tool for evaluating and reducing losses in water supply networks. The tool combines measurement analysis water consumption data and a mathematical model to indicate leaks. Economic module allows to plan repair work to achieve the most effective leaks reduction.
 

 
NEW!
Name of the exhibit: Sludge screw dewatering equipment
Exhibitor: Fontana R, s.r.o.
Manufacturer: Czech Republic
Code: 3.4. 
Description:
Equipment for sludge dewatering by special plastic screw with high wear resistance and tack-free surface.
 

 

NEW!
Name of the exhibit: Camera System CamBoss IV
Exhibitor: IBOS a.s.
Manufacturer: IBOS a.s., Czech Republic
Code: 11.1. 
Description:
The system is designed for pipe monitoring of diameter DN 150 - 1200. The crawler is equipped with Swiss brushless engines of last generation, it offers new solution of back hinge with simple sealing. The camera module is fitted with reversing camera - sensitivity 0,025 lux. It is possible to add the electric robot for milling to CamBoss controll box.
 

 
 

Name of the exhibit: Camera System REVI 260
Exhibitor: IBOS a.s.
Manufacturer: IBOS a.s., Czech Republic
Code: 11.1. 
Description:
Portable monitor device for inspection of pipes DN 50 - 300. Reinforced cable enables manual inserting. The water-tight Pely control box is available in three versions - USB output, SD memory card or PC. The camera head is fitted with \"Rolmatik - artificial levelling\" system and sapphire cover glass. The winder includes an integrated brake and electronic device, e.g. for meter measurement. The axial camera head can be easily exchanged with the rotary and tilting camera head. The swing and spin is controlled by using a touch joystick in the control box.
 

 

Name of the exhibit: Grundomat series N
Exhibitor: Interglobal Duo, s.r.o.
Manufacturer: Tracto - Technik GmbH
Code: 13. 
Description:
Grundomat is a pneumatic device for trenchless pipe laying that has proven its ability for more than 35 years. Grundomat works precisely. The movable head equipped with chisels disturbs the surrounding soil that is compacted along the way. In such manner Grundomad progresses in average speed of 10 m/hour and simultaneously it drags in new pipeline.
 

 

NEW!
Name of the exhibit: POLIECO GROUP
Exhibitor: POLIECO GROUP
Manufacturer: Italy
Code: 6.8. 
Description:
Composite manhole cover, PE/PP drainage and sewage pipe, PE sewage manhole manufacturers.
 
 
 
 
 

 

Name of the exhibit: Model of pneumatic pumping station type GULLIVER
Exhibitor: Prostředí a fluidní technika, s.r.o.
Manufacturer: Hoelschertechnic - gorator, GmbH
Code: 7.6. 
Description:
Model of pneumatic Pumping station type GULLIVER. Compressors transport sewage to the WWTP. Advantage of this system is reservation of aerobic environment in pressure pipe and his regular night cleaning with compressed air. In pipe won´t happen to putrescence and settling of sewage that would reacted problems maintence WWTP.
 
 

 

NEW!
Name of the exhibit:
TOPAZ ductile iron pipeline system for pressure sewerage.
Exhibitor: SAINT-GOBAIN PAM CZ s.r.o.
Manufacturer: SAINT-GOBAIN PAM, France
Code: 6.2. 
Description:
A complete system of pipes and fittings from ductile iron designed for pressure sewerage systems. Connections compatible with plastics junctions.
 
 

 

NEW!
Name of the exhibit:
DURA TRACKER, FLOW METER
Exhibitor: TECHNOAQUA, s.r.o.
Manufacturer: TELEDYNE ISCO, USA
Code: 8.2. 
Description:
Very robust system for flow measurement, IP 68, compatible with different measuring technologies, high accuracy.
 
 
 
 

 

NEW!
Name of the exhibit: MANTA+, MULTIPROBE
Exhibitor: TECHNOAQUA, s.r.o.
Manufacturer: EUREKA WATER PROBES, USA
Code: 8.4. 
Description:
Modular multiprobe which can measure up to 16 parameters in different application.
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Surface water management
Exhibitor: ACO Stavební prvky spol. s r.o.
Manufacturer: ACO Stavební prvky, Czech Republic
Code: 6.9. 
Description:
ACO offers next generation surface water management solutions which control the water flow from collecting, to cleaning, holding and to its timely release back into nature to restore the natural water cycle. Our cutting edge sustainable system solutions are practical, cost-effective and help people to manage the water safety for people and the environment.
 

 
NEW!
Name of the exhibit: Waste water management
Exhibitor: ACO Stavební prvky spol. s r.o.
Manufacturer: ACO Stavební prvky, Czech Republic
Code: 3.12. 
Description:
ACO offers next generation surface water management solutions which control the water flow from collecting, to cleaning, holding and to its timely release back into nature to restore the natural water cycle. Our cutting edge sustainable system solutions are practical, cost-effective and help people to manage the water safety for people and the environment.
 

 

NEW!
Name of the exhibit: RigoLimit V Throttle shaft
Exhibitor: FRÄNKISCHE ROHRWERKE
Manufacturer: Fränkische Rohrwerke, Germany
Code: 17.3. 
Description:
Plastic throttle shaft DN 600 for a controlled discharge of stormwater from stormwater storage systems or ground basins. Works on principle of vortex technology with very effective self-cleaning systém. Vortex outlet range depends on the head of 0,5 l/s. Inlet KG DN 200, outlet DN 250.
 
 

 

NEW!
Name of the exhibit: SediPoint Stormwater treatment
Exhibitor: FRÄNKISCHE ROHRWERKE
Manufacturer: Fränkische Rohrwerke, Germany
Code: 17.5. 
Description:
The sedimentation shaft DN 600 for treatment of polluted stormwater and retention of light liquids. Patented solution prevents leaching of contaminants from the sedimentation area and is suitable for the connected areas up to 3650 m² depending on the requirement of quality of treatment.
 
 
 
 
 

 

Name of the exhibit: DEWATERING SCREW PRESS
Exhibitor: MIVALT s.r.o.
Manufacturer: MIVALT s.r.o., Czech Republic
Description:
Serves to thicken sludge water primarily in wastewater treatment plants or industrial water. This equipment surpasses traditional sedimentation sludge removal. The thickening sludge water to 20% dry-matter content. Low energy consumtion, easy installation and operation, low noise. Czech product.
 
 
 

 

Name of the exhibit: ROOT´S BLOWER MPVB
Exhibitor: MIVALT s.r.o.
Description:
Unconventional Root´s Blower. Very silent and compact blower with intake and exhaust silencer. Long-life blower what needs a minimal service.
 
 
 
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: COMPACT MULTICHANNEL COMMUNICATING LOGGER
Exhibitor: ATJ special, s.r.o.
Manufacturer: CLA-VAL, Switzerland
Code: 8.6. 
Description:
The CLA-VAL CV-Log is a communicating logger allowing the signal acqusition of 1-4 sensors and transmitting the acquired data via GPRS. An alert can be sent via SMS. Protection IP 68, compact housing. 3years autonomy internal batlery or 5 years higl capacity batery pack.
 
 
 
 
 
 

 

Name of the exhibit: Skolan dB
Exhibitor: OSMA
Manufacturer: Ostendorf Kunststoffe, Germany
Code: 6.5. 
Description:
Effluent pipes and fittings are made from polypropylene with mineral content, which grants them the ability to reduce noise intensity. The products conform to the CSN EN 1451-1 standard. The noise levels that have been evidenced during the tests have been much lower than the requirement of the DIN 4109 - the standard that sets the noise conditions in areas that are to be protected from noise. The registered value of 21 dB(A) was even lower than the 25 dB(A) requirement of the stricter German standard VDI 4100.
 

 

Name of the exhibit: KG2000 Polypropylen
Exhibitor: OSMA
Manufacturer: Ostendorf Kunststoffe, Germany
Code: 6.5. 
Description:
Sewage pipes and fittings are made from polypropylene, which grants them the ability to resist boiling water and solar radiation. The products conform to the CSN EN 1852-1 standard. Underground installations in locations with higher peak pressures - highway roads, extreme installation depths, locations with high groundwater levels. Due to the strengthened, homogenous wall of the 2000 Polypropylene® pipes and fittings, the value of their ring stiffness amounts to SN 10.
 

 

NEW!
Name of the exhibit:
Walchem - analyzers for measuring and control of chemical quantities
Exhibitor: Katko s.r.o.
Manufacturer: Walchem, IWAKI America Inc., USA
Code: 7.2. 
Description:
American producer of analyzers for measuring and control of chemical quantities. The two main specializations of Walchem company are the water quality control (cooling, boiler, drinking, pool.... ) and the baths for surface treatment (chemical nickel, copper).
 
 
 
 
 

 

NEW!
Name of the exhibit: Dosage station ADS-38-TC for dosing of liquids in hard-to-access terrain
Exhibitor: Katko s.r.o.
Manufacturer: Katko s.r.o., Czech Republic
Code: 7.2. 
Description:
ADS-38-TC is a metering pump that is specially designed for hard-to-access terrain where the electricity wiring is difficult to get. It is intended for dosign of desinfectant for water treatment (eg. for  sodium hypochloride or Savo). The power is got from 12V battery.
 
 
 

 

Name of the exhibit: Line pipe for water with MAPEC coating with interlocking (T-rib) and additional FCM coat (FCM-S)
Exhibitor: PVK s.r.o.
Manufacturer: Salzgitter Mannesmann Line Pipe GmbH, Germany
Code: 5.1. 
Description:
The combination of mechanical protection and shear force transmission makes this coating type specially suitable for trenchless pipe-laying projects.
 
 

 
NEW!
Name of the exhibit: Aerzen Turbo TB 50
Exhibitor: AERZEN CZ s.r.o.
Manufacturer: AERZEN, Germany
Code: 3.19. 
Description:
Energy efficiency that is one step ahead. Designed especially for small and medium volume flows, the frequency-controlled Turbo blowers from AERZEN deliver maximum energy efficiency. Their state-of-the-art compressor technology make them perfect additions to the AERZEN portfolio: there is now the right machine for every level of volume flow.
 
 
 
 
 


Name of the exhibit: Delta Hybrid D 17 L
Exhibitor: AERZEN CZ s.r.o.
Manufacturer: AERZEN, Germany
Code: 3.19. 
Description:
Efficiency as principle in compressor technology. About 90% of a compressor´s life cycle costs go to energy use. A huge challenge, especially where ecological demands and global competition requires the globalisation of potential of the whole company. AERZEN is meeting this challenge with energy savings of up to 15%. Which means the investment will pay for itself after only two years, depending on the volume streams and pressures involved. That´s the Delta Hybrid.
 

 
NEW!
Name of the exhibit: Dosing pump \"i STEP\"
Exhibitor: HENNLICH s.r.o.
Manufacturer: sera ProDos  GmbH - Germany
Code: 7.2. 
Description:
Intelligent drive concept with the accurancy. Wide performance range with only one pump. Low pulsation dosage. Intuitive menu navigation.
 
 
 
 
 
 
 

 
NEW!
Name of the exhibit: Surface portable pump LB 80B
Exhibitor: Atlas Copco s.r.o.
Manufacturer: Atlas Copco, Italy
Code: 7.3. 
Description:
Diaphragm self-priming portable pump powered by petrol, diesel or electrical engine. These pumps are suitable for pumping of abrasive and high density liquids (sludge removal, bentonite, sewage etc.)
 
 
 

 
Name of the exhibit: Submersible pump WEDA 30
Exhibitor: Atlas Copco s.r.o.
Manufacturer: Atlas Copco, Spain
Code: 7.4. 
Description:
Portable electric submersible pump for dewatering of construction sites, mines, flooded areas. Designed for handling liquid with abrasive particles. Robust design, but lightweight.
 
 
 
 
 
 
 
 

 

Name of the exhibit: MULTICAL 21
Exhibitor: KAMSTRUP A/S
Manufacturer: Kamstrup, Danmark
Code: 8.1. 
Description:
MULTICAL 21 is ultrasonic compact smart water meter for measurement of water consumption in households, apartment buildings and small commercial properties. Consumption data can be remotely read by means Wireless M-Bus, which is built into the meter. It has built-in sensitive leak monitoring.
 
 
 
 
 
 
 

 

Name of the exhibit: flowlQ 3100
Exhibitor: KAMSTRUP A/S
Manufacturer: Kamstrup, Danmark
Code: 8.1. 
Description:
flowlQ 3100 is ultrasonic smart water meter for measurement of water consumption in blocks of flats and commercial premises. Consumption data can be remotely read by Wireless M-Bus or via wired M-Bus network. It works well also for water wells. The water meter is powered by long-life battery.
 
 
 
 
 
 

 

NEW!
Name of the exhibit: TU5 SERIES TURBIDIMETERS
Exhibitor: Hach
Manufacturer: Hach Lange, Germany
Code: 8.6. 
Description:
The next standard in the evolution of turbidity. Only the new TU5 Series Lab & Process Turbidimeters with groundbreaking 360° x 90° Detection deliver unprecedented confidence that a change in your reading is a change in your water.
 


Name of the exhibit: SL 1000 PORTABLE PARALLEL ANALYSER (PPA)
Exhibitor: Hach
Manufacturer: Hach Lange, Germany
Code: 10.5. 
Description:
SL 1000 Portable Parallel Analyser (PPA) performs analysis of four colorimetric and two electrochemical parameters simultaneously. All chemicals and processes are entirely contained inside the Chemkey. There are no powder pillows or glass vials to handle.

 

 

 

 


 
Name of the exhibit: POTABLE WATER AND POTABLE WATER TANKS
Exhibitor: AMIANTIT Germany GmbH
Manufacturer: AMIANTIT Germany GmbH, Germany
Code: 5.2. 
Description:
FLOWTITE pipes have proved to be excellent for conveyance of water and raw water. With its smooth bore, good abrasion resistance, long pipe lengths, and wide range of diameters, FLOWTITE pipes have a leading edge in transport in this kind of application. More information: www.amiantit.eu

 

 

 

 


 

Name of the exhibit: SEWER PIPELINES
Exhibitor: AMIANTIT Germany GmbH
Manufacturer: AMIANTIT Germany GmbH, Germany
Code: 6.3. 
Description:
Among the first and most successful installations of FLOWTITE pipes are sewer applications. FLOWTITE sewer pipes are also used to design storm water overflow systems, collection basins, sedimentation basins with overflow and storm water retention basins. More information: www.amiantit.eu
 

 

 

OWNER AND PROFESSIONAL GUARANTEE: ORGANIZER:
Sdružení oboru vodovodů a kanalizací ČR, z.s.
Novotného lávka 5
116 68 Praha 1, Česká republika
IČO: 60456116, DIČ: CZ60456116
sekretariát: tel.: +420 221 082 207
Exponex s.r.o.
Pražákova 60
619 00 Brno, Česká republika
IČO: 29222338, DIČ: CZ29222338
sekretariát: tel.: +420 547 210 864